Double & Single Acting Cylinders

We have a standard range of stock cylinders which can be supplied to you on a next day delivery service.

 

WYE CYLINDER

Double & Single Acting

Cylinders

We have created a limited range of a basic cylinder design that can be used for a wide range of applications.

We currently have three different bore and rod combinations in various different lengths (see table for further details). This range was developed and stocked to enable WCE to provide a very quick turnaround offering a next day delivery service. These cylinders can also be used as a single acting cylinder BUT the port that is not in use must be fitted with a vented breather.

Overview
Features
Specification

Have A Question?

Please feel free to contact us. We’re happy to talk to you. Feel free to ask anything.

DOUBLE & SINGLE ACTING CYLINDERS

Features

Standard Features throughout the range.

  • Double or single acting
  • Pin mounted at both ends
  • Provision for grease nipples at both ends (76.2mm bore x 44.45mm rod design only)
  • Headed gland nuts for reducing servicing downtime
  • High quality medium duty sealing system through out

Double Acting Cylinder
Small 1.75″ BORE x 1.00″ ROD

Double Acting Cylinder
Medium 2.375″ BORE x 1.50″ ROD

Double Acting Cylinder
Large 3.00″ BORE x 1.75″ ROD

DOUBLE & SINGLE ACTING CYLINDERS

Specifications

TUBE:– All tubes manufactured from ready to use smooth bore, EN10305-2 specification, E355 steel grade.

ROD:– All rods manufacture from either CK45 (EN8) or 20MnV6 (EN14) pre- chromed bar.

PISTON:– Mild Steel ~ 070M20
GLAND NUT:– Cast Iron ~ EN1561 GJL250

ALL DOUBLE ACTING CYLINDERS ARE PRESSURE TESTED ON A PURPOSE- BUILT RIG TO A PRESSURE OF 241 BAR (3500 PSI) AND THEN STAMPED WITH PART, JOB, & SERIAL NUMBERS, WEIGHT, MANUFATURE DATE AND MAX W/PRESSURE FOR FULL IDENTIFICATION.